en
Installation and connection
18
Optional accessories
Order optional accessories
*
from the
after-sales service:
■
Washer-dryer stack connection set:
To save space, the dryer can be
placed on top of a suitable washing
machine of the same width and
depth.
The dryer must be secured to the
washing machine using this
connection set.
Order number with pull-out worktop:
WTZ11400
;
Transport and frost protection
:
Warning
Risk of injury/material damage/
damage to the appliance!
■
If you take hold of any of the
appliance's protruding parts (e.g. the
appliance door) in order to lift or
move it, these parts may break off
and cause injury.
Do not take hold of any of the
appliance's protruding parts in order
to move the appliance.
Risk of injury/material damage/damage to the appliance!
■
If the appliance is not transported
properly, this may result in injury,
material damage or damage to the
appliance.
Transport this appliance as
described on the packaging and
take note of the trolley symbol. If it is
unpacked, transport the appliance
on its side on a trolley.
1.
Empty the condensate container.
2.
Select any programme using
the programme selector.
3.
Press the Start button.
4.
Wait for 5 minutes.
Note:
The condensation is drained.
5.
Empty the condensate container
again.
6.
Switch off the dryer.
Note:
Despite draining, there will
always be some residual water in
the dryer.
Caution!
Any residual water may leak out
and cause material damage.
Transport the dryer in an upright
position.
Caution!
The dryer contains coolant and may be
damaged.
Allow the dryer to rest for two hours
before initial use.
* Depending on the model
