Cleaning and maintenance
en
45
D
Cleaning and
maintenance
Cleaning and maintenance
Cleaning the appliance
:
Warning
Risk of death!
The appliance is powered by electricity.
There is a risk of electric shock if you
come into contact with live components.
Therefore please note:
■
Switch off the appliance. Disconnect
the appliance from the power supply
(pull out the plug).
■
Never take hold of the mains plug
with wet hands.
■
When removing the mains plug from
the socket, always take hold of the
plug itself and never the mains
cable, otherwise this may damage
the mains cable.
■
Do not make any technical
modifications to the appliance or its
features.
■
Repairs and any other work on the
appliance must only be conducted
by our customer service or by an
electrician. The same applies for
replacing the mains cable (when
necessary).
■
Spare mains cables can be ordered
from our customer service.
:
Warning
Risk of poisoning!
Poisonous fumes may be given off by
cleaning agents that contain solvents,
e.g. cleaning solvent.
Do not use cleaning agents that contain
solvents.
:
Warning
Risk of electric shock/material
damage/damage to the appliance!
If moisture penetrates the appliance,
this may cause it to short circuit.
Do not use a pressure washer, steam
cleaner, hose or spray gun to clean
your appliance.
Caution!
Material damage/damage to the
appliance
Cleaning agents and agents for
pretreating laundry (e.g. stain removers,
prewash sprays, etc.) may cause
damage if they come into contact with
the surfaces of the appliance. Therefore
please note:
■
Do not allow these agents to come
into contact with the surfaces of the
appliance.
■
Clean the appliance with nothing but
water and a soft, damp cloth.
■
Remove any detergent, spray or
other residues immediately.
Cleaning the base unit
This appliance is equipped with
automatic self-cleaning. Fluff from the
laundry does not have to be removed
after each use – it is collected in the
base unit.
In order to not adversely affect the
operation of the appliance, you
must
clean the base unit (fluff collector and
fluff filter) only in the following cases:
■
The following message appears in
the display:
õ
■
Before running the appliance care
programme.
As an option, you can
clean the
appliance's base unit at any time.
Note:
Allow the appliance to cool down
for approximately 30 minutes after use
before commencing cleaning.
Summary of Contents for WTX8HKP9SN
Page 63: ...6 ...
