Home Connect
en
37
6.
If your appliance is not shown
automatically, select
Appliance
search
and then
Connect an
appliance
in the
Home Connect app.
7.
Carry out the last steps in the
Home Connect app to connect your
appliance.
If the appliance has connected to your
home network successfully,
’©Ÿ
(connected) will appear on the display.
8.
Press
Remote Start
}
briefly to exit
the Home Connect settings.
Note:
If a connection could not be
established,
“§§
(fault) will appear on
the display. Check whether your
smartphone or tablet PC is in range of
your home network and whether it is
connected to it. Try connecting to the
Home Connect app again.
Activating/deactivating Wi-Fi
You can switch the Home Connect
function on your appliance on or off
permanently at any time.
1.
Switch on the appliance.
2.
Press and hold
Remote Start
}
for
at least 3 seconds.
‘ž£
(connect automatically) will
appear on the display.
3.
Turn the programme selector to
position 4.
’©Ÿ
(Wi-Fi function) will appear on
the display.
4.
Press (Start/Pause)
A
.
If
©Ÿ
(switched on) appears on the
display, the Wi-Fi function on the
appliance has been activated. If
©””
(switched off) appears on the
display, the Wi-Fi function is not active.
5.
Press
Remote Start
}
briefly to exit
the Home Connect settings.
Notes
■
If Wi-Fi is switched off on the
appliance, the appliance cannot be
connected to your home network or
the app.
■
If Wi-Fi is switched on on the
appliance, when it is in Energy
saving mode, the appliance will not
automatically switch itself off.
■
If Wi-Fi is switched on on the
appliance and you wish to switch it
off, you must perform all these steps
again.
