Bosch WTW875L8SN Installation And Operating Instructions Manual Download Page 4

en

    Intended use

4

8

Intended use

Intended use

This appliance is intended for private 

domestic use only.

Do not install or operate this 

appliance anywhere that is liable to 

experience frost and/or outdoor 

conditions. There is a risk that the 

appliance will be damaged if 

residual water in it freezes. If hoses 

freeze up, they may crack/burst.

This appliance must only be used for 

drying and freshening up domestic 

laundry, consisting of items that have 

been washed with water and are 

suitable for tumble drying (see label 

on item). Using the appliance for any 

other purpose is outside of the 

scope of its intended application and 

is forbidden.

This appliance is intended for use up 

to a maximum height of 

4000 metres above sea level.

Before you switch on the appliance:

Check that there is no visible damage to 

the appliance. Do not operate the 

appliance if it is damaged. Should you 

have any problems, please contact your 

specialist dealer or our customer 

service.
Read and follow the operating and 

installation instructions and all other 

information provided with this appliance.
Retain the documents for subsequent 

use or for subsequent owners.

(

Safety instructions

Safety instructions

The following safety information 

and warnings are provided to 

protect you from injury and to 

prevent material damage to 

your surroundings.
It is nevertheless important to 

take the necessary precautions 

and to proceed with care when 

installing, maintaining, cleaning 

and operating the appliance.

Children/people/pets

:

Warning

Risk of death!

Children and other people who 

are unable to assess the risks 

involved when using the 

appliance may injure 

themselves or may find 

themselves in life-threatening 

situations. Therefore please 

note:

The appliance may be used 

by children over the age of 8 

years and by persons with 

reduced physical, sensory or 

mental capacity or by 

persons with a lack of 

experience or knowledge as 

long as they are supervised 

or have received instruction 

on how to use the appliance 

safely and they have 

understood the potential 

risks of using the appliance.

Children must not play with 

this appliance.

Summary of Contents for WTW875L8SN













































Reviews: