Replacing the condensation drain
en
31
Œ
Replacing the
condensation drain
Replacing the condensation drain.
By default, the condensation from the
appliance runs into the condensation
container.
Alternatively, you have the option of
discharging the condensation water into
the waste-water system via a drain
hose. If you choose to discharge the
condensation water into the waste-water
system, you will not need to empty the
condensation container during the
drying programme or after each time
you use the dryer.
Replace the condensation drain as
follows:
1.
Remove any accessories from the
drum.
2.
Remove all items from the bag.
3.
Detach the condensation hose from
the socket.
Note: .
The appliance comes
delivered with the condensation
hose already fitted to the socket.
4.
Place the condensation hose in the
"parked" position.
5.
Take the drain hose from the
accessories and attach it to the free
socket, pushing it up to the stop.
6.
Secure the other end of the drain
hose in place using the remaining
accessories (depending on the
connection type).
