Bosch WTW8748BSN, Installation And Operating Instructions Manual, Page: 27 / 40

Operating the appliance
en
27
Programme sequence
The programme status is indicated in
the display field.
Changing the programme or
adding laundry
You can remove or add laundry and
change or alter the programme at any
time during drying.
1.
To pause the programme, open the
dryer door or press the Start button.
2.
Add or remove laundry.
3.
Select another programme or an
additional function, if required.
4.
Close the dryer door.
5.
Press the Start button.
Note:
The programme duration in the display
panel is updated depending on the load
and residual moisture in the laundry.
The values displayed may change after
the programme is changed or the load
is adapted.
Cancelling the programme
The programme can be interrupted at
any time; to pause, open the dryer door
or press the Start button.
Caution!
Risk of fire. Laundry may catch fire.
If you cancel the programme, you must
remove the laundry items and spread
them out so that the heat can disperse.
Programme end
“Ÿš
appears in the display panel.
Removing laundry and
switching off the dryer
1.
Remove the laundry.
2.
Turn the programme selector to the
"off" position.
e.g.
1:27
Expected programme duration
in hours and minutes.
Note:
When a programme is selected,
the expected drying time for the
recommended load is displayed.
During drying moisture sensors
detect the remaining moisture in
the load and adjust the
programme length (except
timed programmes). This is
visible via the time remaining
leaping forward.
Ù
Dry
ö
Iron Dry
»
Cupboard Dry
Q
AntiCrease
-
˜
-
Pause
“Ÿš
End