en
Replacing the condensation drain
34
Œ
Replacing the
condensation drain
Replacing the condensation drain
By default, the condensation from the
appliance runs into the condensation
container.
Alternatively, you have the option of
discharging the condensation water into
the waste-water system via a drain
hose. If you choose to discharge the
condensation water into the waste-water
system, you will not need to empty the
condensation container during the
drying programme or after each time
you use the dryer.
Replace the condensation drain as
follows:
1.
Remove any accessories from the
drum.
2.
Remove all items from the bag.
3.
Detach the condensation hose from
the socket.
Note:
The appliance comes
delivered with the condensation
hose already fitted to the socket.
4.
Place the condensation hose in the
"parked" position.
5.
Take the drain hose from the
accessories and attach it to the free
socket, pushing it up to the stop.
Summary of Contents for WTW85530EE
Page 1: ...en Installation and operating instructions Tumble dryer WTW85530EE ...
Page 46: ...6 ...
Page 47: ...6 ...
