en
Energy-saving tips
12
7
Energy-saving tips
Energy-saving tips
■
Spin the laundry before drying. The
drier the laundry, the shorter the
programme will be, in turn reducing
energy consumption.
■
Load the appliance with the
maximum loads permitted for the
programmes.
Note:
If the maximum load is
exceeded, this extends the programme
duration and increases energy
consumption.
■
Operate the appliance in a ventilated
room and make sure that the air inlet
on the appliance is unobstructed so
that air exchange can take place
unhindered.
■
Regularly remove the fluff from the
appliance. If there is fluff in the
appliance, this extends the
programme duration and increases
energy consumption.
■
If you do not perform any actions on
the appliance for an extended period
before the programme starts or once
the programme has ended, the
appliance will automatically switch to
energy-saving mode. The display
and indicator lights go out after a
few minutes and
A
(Start/Pause)
flashes. To end energy-saving mode,
all you need to do is perform an
action on the appliance, such as
opening and closing the door.
5
Installing and
connecting the
appliance
Installing and connecting the appliance
Scope of supply
1.
Remove any packaging and
protective covers completely from
the appliance.
2.
Open the door.
3.
Remove all the accessories from the
drum.
You can now install and connect the
appliance.
Caution!
Risk of material damage and damage
to the appliance
Objects remaining in the drum that are
not designed for operation with the
appliance may result in material
damage and damage to the appliance.
Remove these objects, along with all
accessories, from the drum.
Accompanying documents (e.g.
installation and operating
instructions)
Summary of Contents for WTR87TW0SN
Page 43: ...6 ...
