manualshive.com logo in svg

Bosch WTR85V90ES, Installation And Operating Instructions Manual, Page: 28 / 44

Share
Download
Bosch WTR85V90ES Installation And Operating Instructions Manual Download Page 28

en

    Operating the appliance

28

2.

Add or remove laundry.

3.

If required, select a different 

programme or a different 

programme setting.

~

 "Overview of 

programmes" on page 22

 

~

 "Programme settings" 

on page 24

Note:  

Do not change the 

programme during the CoolDown 

process.

4.

Close the door.

5.

Press 

~

 Inicio/Pausa

 A

 (Start/

Pause) .

Note:  

The programme duration is 

updated on the display, depending on 

the load and on the residual moisture in 

the laundry. The values displayed may 

change when the programme or load is 

changed.

Cancelling the programme

The programme can be cancelled at 

any time by opening the door or 

pressing 

~

 Inicio/Pausa

 A

 (Start/

Pause) .

Caution!

Risk of fire. Laundry may catch fire.

If you cancel the programme, remove all 

items of laundry from the dryer and 

spread them out to allow the heat to 

dissipate.

Programme end

The following message appears in the 

display: 

“Ÿš

Removing laundry and 

switching off the appliance

1.

Remove the laundry.

2.

Turn the programme selector to 

switch off the appliance.

Emptying the condensation 

container

Note:  

After each drying cycle, empty 

the condensate container; otherwise 

the next drying programme may be 

cancelled as a result of the condensate 

container being full.

Summary of Contents for WTR85V90ES













































Reviews:

No comments