Installing and connecting the appliance
en
13
5
Installing
and connecting
the appliance
Installing and connecting the appliance
Scope of supply
1.
Remove any packaging and
protective covers completely from
the appliance.
2.
Open the door.
3.
Remove all the accessories from the
drum.
You can now install and connect the
appliance.
Caution!
Risk of material damage and damage
to the appliance
Objects remaining in the drum that are
not designed for operation with the
appliance may result in material
damage and damage to the appliance.
Remove these objects, along with all
accessories, from the drum.
Installing the appliance
:
Warning
Risk of death!
Children may lock themselves inside
appliances and find themselves in a life-
threatening situation.
■
Do not position the appliance behind
a door, as this may obstruct the
appliance door or prevent it from
opening completely.
■
Once an appliance has reached the
end of its life, pull the mains plug
from the socket
before
severing the
mains cable, and then destroy the
lock on the appliance door.
:
Warning
Risk of explosions/fire!
If there is coal dust or flour in the air
around the appliance, this may cause
an explosion.
Make sure that the area around the
appliance is kept clean when it is in
operation.
:
Warning
Risk of fire/material damage/damage
to the appliance!
The appliance contains R290, a
refrigerant that is environmentally
friendly but flammable.
Keep open fire and ignition sources
away from the appliance.
Accompanying documents (e.g.
installation and operating
instructions)
