24
Loading the laundry
9
WARNING
RISK OF EXPLOSION
Do not dry laundry that has ever been in contact
with solvents, oil, wax, grease or paint (e.g. nail
varnish remover, stain remover, cleaning solvent,
etc.).
1.
Check lint filter.
The filter should be cleaned after or before every
drying process. Cleaning the filter reduces the drying
time and saves energy.
Cleaning the lint filter; Page 30
2.
Load the laundry into the drum and close the door.
Tip:
If the door has not been closed properly, the dryer
will not start.
Tips
After loading, close the door carefully so as not to trap
any items between the door and the rubber seal. The
door should close until a click is heard.
Foreign objects left in the drum may damage laundry.
Before inserting any laundry, check to make sure no
foreign objects are in the drum.
Recommended Load Size
Recommended maximum load size can be found in the
program selection table in this manual.
Program selection table; Page 28
Load the laundry
Place laundry in the empty drum. Put each piece of
laundry into machine separately.
For best results the laundry should be sorted according
to type of laundry and desired degree of drying.
Program selection table; Page 28
Starting the program
1.
Rotate program selector to the desired program.
Select the program which corresponds to the laundry
in the dryer from Program selection table.
Program selection table; Page 28
The
Start/Pause
indicator light starts flashing.
2.
Touch the
Start/Pause
button. Indicator lamp lights up
and the cycle starts.
During the cycle, the display area indicates the
estimated remaining time and symbols showing the
cycle progress are lit.
NOTICES
▯
If you want to protect the cycle against inadvertent
adjustment, select the
Childproof lock
.
▯
If
é
indicator lights up, clean the lint filter and/or
Condenser.
Cleaning the lint filter; Page 30
Cleaning the Condenser; Page 32
▯
If
DR
indicator lights up, check the drain hose and
its connection.
Cleaning the Condenser; Page 32
L
