manualshive.com logo in svg

Bosch WTA79200GB, Installation And Operating Instructions Manual, Page: 12 / 40

Share
Download
Bosch WTA79200GB Installation And Operating Instructions Manual Download Page 12

en

    Installation and connection

12

Energy-saving tips

■

Spin the laundry before drying. The 

drier the laundry, the shorter the 

drying time will be, thus consuming 

less energy.

■

Load the dryer with the maximum 

load.

Note:  

Do not exceed the maximum 

load for the programs, as this 

prolongs the drying time and 

increases energy consumption.

■

Ventilate the room and keep the air 

inlet on the dryer free to ensure air 

exchange.

■

Clean the fluff filter after each drying 

cycle. If the fluff filter is dirty, the 

drying time is prolonged and energy 

consumption is increased.

■

Energy-saving mode

: If the dryer is 

not operated for a prolonged period, 

it automatically switches off before 

the program starts and when the 

program has ended to save energy. 

The display panel and indicator 

lamps go off after a few minutes and 

the Start button flashes. To activate 

the lighting, press any button, open 

or close the dryer door or turn the 

program selector.

5

 Installation and 

connection

Installation and connection

Scope of delivery

■

Dryer

■

Installation and operating 

instructions

■

Basket for woollens

*

Installing and connecting the 

dryer

:

Warning

Risk of death!

There is a risk of electric shock as the 

dryer is operated with electricity.

■

Check the dryer for visible damage. 

You must not operate the dryer if it is 

damaged.

■

Before connecting the dryer to the 

power supply, ensure that the 

electric voltage specified on the 

rating plate matches the voltage of 

your socket.

■

Only use earth-leakage circuit 

breakers with the following symbol: 

z

.

■

Ensure that the mains cable is not 

kinked or trapped, and that it does 

not come into contact with heat 

sources or sharp edges.

:

Warning

Children may lock themselves in the 

dryer, putting their lives at risk!

Do not set up the dryer behind a door 

or sliding door, as this may obstruct the 

dryer door or prevent it from opening.

Caution!

Risk of injury

■

Due to the heavy weight of the dryer, 

you may injure yourself if you lift it. 

Do not lift the dryer on your own.

* Depending on the model

Summary of Contents for WTA79200GB









































Reviews:

No comments