background image

Safety instructions    

en

7

:

Warning

Risk of fire/poisoning!

Connecting the exhaust air duct 

to ventilation shafts or 

chimneys to which gas or coal-

burning stoves, cookers or 

ovens or gas-fired space 

heaters are already connected 

runs the risk of causing fire or 

poisoning.

Channel the exhaust air 

through an exhaust air duct that 

is routed directly outdoors. 

Always have the chimney 

sweep responsible confirm that 

your appliance is operating 

safely.

:

Warning

Risk of fire/material damage/

damage to the appliance!

The use of extension cords or 

power strips may result in fire 

due to overheating or short 

circuiting.

Connect the appliance directly 

to an earthed socket that has 

been correctly installed. Do not 

use extension cords, power 

strips or multi-way couplers.

:

Warning

Risk of injury/material 

damage/damage to the 

appliance!

The appliance may vibrate or 

move when in operation, 

potentially resulting in injury 

or material damage.

Place the appliance on a 

clean, even, solid surface 

and, using a spirit level to 

guide you, level it with the 

screw-in feet.

Risk of injury/material damage/damage to the appliance!

Incorrectly placing (stacking) 

this appliance on top of a 

washing machine may result 

in injury, material damage 

and/or damage to the 

appliance.

If this appliance is to be 

placed on top of a washing 

machine, the washing 

machine must be of at least 

the same depth and width as 

the appliance, and it must be 

secured in place with the 

appropriate connection set if 

available 

~

 Page 19

. The 

appliance MUST be secured 

with this connection set. 

Stacking the appliance in 

any other way is forbidden.

Risk of injury/material damage/damage to the appliance!

Summary of Contents for WTA74201SG









































Reviews: