background image

en

    Programs and buttons

26

--------

Timed program warm

  

5

All types of fabric; time programme.
Suitable for pre-dried or slightly damp laundry and for drying off 

multi-layered, thick laundry.

Notes

Only dry wool, sports shoes and soft toys with the basket for 

woollens 

~

 Page 19

.

In the time programme, the laundry's residual moisture is not 

automatically detected. If the laundry is still too damp after 

the drying programme, repeat the programme and, if required, 

extend the programme length.

3 kg

You can adjust the programme 

length using the button for 

the drying time.

Timed program cold

  

5

All types of fabric. For freshening up or airing items of laundry 

that have not been worn for long.

3 kg

You can adjust the programme 

length using the button for 

the drying time.

Shirts

  

Non-iron shirts or blouses made of cotton, linen, synthetic fibres 

or blended fabrics.

1.5 kg

SuperQuick 40’

  

^

Synthetics and light cottons.

2

 

kg

Wool finish 

 

l

Machine-washable fabrics made of wool or containing wool.

Notes

Fabrics become fluffier but not dry.

Remove fabrics once the programme has ended and allow to 

dry.

3 kg

Delicates 

 

For delicate, washable underwear, e.g. made of velvet, lace, Lycra, 

silk or satin.

1 kg

Summary of Contents for WTA74201SG









































Reviews: