Device maintenance NL
16.4 Simple device maintenance
on the device
perform rate
2.
Push in the condensed water
container until it locks.
A simple device maintenance can be
performed to remove possible light
contamination.
Remark: After a certain period of use,
the device automatically recommends
simple device maintenance. The
display shows the tip "CrE" for 5
seconds before the start and after the
program has ended. The note is
displayed several times until the
simple device maintenance has been
completed.
3.
Press Start/Refill.
a The device maintenance starts and there
a signal sounds.a The display
shows "End" at the
end of device maintenance and a
signal sounds.
Requirements
sex The appliance is prepared for
the device maintenance.
"Preparing the device for device
sex Device maintenance has started.
4.
Pull out the condensed water
container horizontally.
1.
Approx. Fill 1 liters of warm tap water
into the condensate container.
5.
Emptying the condensed water container
Hold the filled condensed water
container horizontally so that no
liquid escapes.
39
