Appliance care
en
37
15.2 Changing the basic set-
tings
1.
Set the programme selector to po-
sition 1.
2.
Press
Iron Dry
and, at the
same time, turn the programme
selector to position 2.
a
The display shows the current
value.
3.
Set the programme selector to the
required position.
→
"Overview of the basic settings",
4.
To change the value, press
Fin-
ish in
.
5.
To save the changes, switch off
the appliance.
16 Appliance care
16.1 Preparing the appliance
for the appliance care
programme
The appliance must be prepared be-
fore basic or intensive appliance care
is carried out.
Requirement:
The fluff filter has been
cleaned.
→
"Cleaning the fluff filter", Page 30
.
1.
Remove the laundry.
2.
Close the appliance door.
3.
Pull out the condensation con-
tainer, keeping it level.
4.
Summary of Contents for WQG245AESN
Page 55: ......