background image

en 

Installation and connection

12

Spin the laundry in the washing ma-
chine before drying.

a

If the laundry is excessively damp,
this extends the programme dura-
tion and increases energy con-
sumption.

Observe the programme's maximum
load capacity. 
→ 

"Programmes", Page 26

a

If the maximum load is exceeded,
this extends the programme dura-
tion and increases energy con-
sumption.

After drying, clean the fluff filter
→ 

Page 31

.

a

If the fluff filter is dirty, this reduces
the air flow in the appliance, ex-
tends the programme duration and
increases energy consumption.

Dry the filters in the  filter system of
the base unit → 

Page 33

 thoroughly

after cleaning.

a

If the filters are damp, this extends
the programme duration and in-
creases energy consumption.

3.3 Energy saving mode

If you do not use the appliance for an
extended period, it automatically
switches to energy-saving mode. All
displays go out and 

Start/ Nachlegen

flashes.
Energy-saving mode ends when you
use the appliance again.

4 Installation and con-

nection

4.1 Unpacking the appliance

ATTENTION!

Objects remaining in the drum that
are not designed for operation with
the appliance may cause material
damage and damage to the appli-
ance.

Remove these objects, along with
all supplied accessories, from the
drum before starting the appliance.

1.

Remove any packaging and pro-
tective covers completely from the
appliance.
→ 

"Disposing of packaging",

Page 11

2.

Check the appliance for visible
damage.

3.

Open the appliance door. 
→ 

"Basic operation", Page 30

4.

Remove any accessories from the
drum.

5.

Close the appliance door.

4.2 Scope of delivery

After unpacking all parts, check for
any damage in transit and complete-
ness of the delivery.

ATTENTION!

If the appliance is operated with in-
complete or defective accessories,
the appliance may not be able to op-
erate properly, or this may result in
material damage or damage to the
appliance.

Do not operate the appliance with
incomplete or defective accessor-
ies.

Summary of Contents for WQG2410H0





















































Reviews: