Basic operation
en
29
– Empty any pockets
– Brush sand out of all collars and
pockets
– Close bed covers and cushion
covers
– Close all zips, Velcro fasteners,
hooks and eyes
– Tie cloth belts, apron strings,
etc. together or use a laundry
bag.
– Remove curtain hooks and lead
strips or use a mesh laundry
bag
– Use a mesh laundry bag for
small items of laundry, such as
children's socks
– Separate items of laundry and
shake them out, or observe the
programme description
– Spin the laundry before drying
Basic operation
12 Basic operation
Basic operation
Note:
You can find further information
in the digital instruction manual by
scanning the QR code in the table of
contents or on www.bosch-
home.com.
12.1 Switching on the appli-
ance
Requirement:
The appliance has
been correctly installed and connec-
ted.
→
"Installation and connection",
▶
Turn the programme selector to a
programme.
Note:
The lighting for the drum goes
out automatically.
12.2 Setting a programme
1.
Turn the programme selector and
set the required programme.
→
2.
If necessary, adjust the pro-
gramme settings.
12.3 Loading laundry
Note:
To prevent creasing, take note
of the maximum load for the
→
.
Requirement:
The laundry is pre-
pared.
→
1.
Open the door.
Make sure that the drum is empty.
2.
Place the laundry in the drum.
3.
Close the door.
Ensure that there is no laundry
trapped in the door.
12.4 Starting the programme
Note:
If you want to change the time
until the programme ends, set the
"Ready in" time first.
▶
Press
Έναρξη/Προσθήκη ρούχων
.
a
The display shows either the pro-
gramme duration or the "Ready in"
time.
a
After the programme has ended,
the display shows: "End".
12.5 Adding laundry
After the programme starts, you can
remove or add laundry at any time.
1.
Press
Έναρξη/Προσθήκη ρούχων
.
The cooling process starts auto-
matically after approx. 30 seconds
and cools down the laundry while
the drum is rotating. If you want to
