background image

en 

Customer Service

46

1.

Unplug the appliance from the
mains.

2.

Cut through the power cord.

3.

Dispose of the appliance in an en-
vironmentally friendly manner.
Information about current disposal
methods are available from your
specialist dealer or local authority.

This appliance is la-
belled in accordance
with European Directive
2012/19/EU concerning
used electrical and elec-
tronic appliances (waste
electrical and electronic
equipment - WEEE).
The guideline determ-
ines the framework for
the return and recycling
of used appliances as
applicable throughout
the EU.

18 Customer Service

If you have any queries on use, are
unable to rectify faults on the appli-
ance yourself or if your appliance
needs to be repaired, contact Cus-
tomer Service.
Function-relevant genuine spare parts
according to the corresponding Eco-
design Order can be obtained from
Customer Service for a period of at
least 10 years from the date on
which your appliance was placed on
the market within the European Eco-
nomic Area.

Note: 

Under the terms of the manu-

facturer's warranty the use of Cus-
tomer Service is free of charge.

Detailed information on the warranty
period and terms of warranty in your
country is available from our after-
sales service, your retailer or on our
website.
If you contact Customer Service, you
will require the product number (E-
Nr.) and the production number (FD)
of your appliance.
The contact details for Customer Ser-
vice can be found in the enclosed
Customer Service directory or on our
website.

18.1 Product number (E-Nr.)

and production number
(FD)

You can find the product number (E-
Nr.) and the production number (FD)
on the appliance's rating plate.
Depending on the model, the rating
plate is located:

¡

On the inside of the door.

¡

On the inside of the maintenance
flap.

¡

On the rear of the appliance.

Make a note of your appliance's de-
tails and the Customer Service tele-
phone number to find them again
quickly.

Summary of Contents for WQG233D0ES





















































Reviews: