Bosch WNA254U0IN Instruction Manual And Installation Instructions Download Page 38

Page: 38 / 52

Operating the appliance

Adding/removing laundry

After starting the programme (only for

washing), you can add or remove

laundry if necessary.
Touch the

Start/Pause

button. The

appliance checks whether reloading is

possible.

If the following appears on the display

panel:

■

The symbol

disappears,

reloading is possible.

■

The symbol

lights up, reloading is

not possible.

To continue the programme, touch the

Start/Pause

button. The

programme continues automatically.

Notes

■

Do not leave the door open for too

long when adding laundry as water

from the laundry may leak out.

■

For safety reasons, the door remains

locked when the water level or

temperature is high, or while the

drum is turning, and it is not possible

to add laundry during this time.

Changing the programme

If you have started the wrong

programme by mistake, you can

change the programme as follows:

Touch the

Start/Pause

button.

Select another programme.

And touch the

Start/Pause

button again. The new programme

starts from the beginning.

Note:

If drying is activated, after

touching the

Start/Pause

button,

when the

Hot

is displayed, waiting for

the appliance running to cool down the

laundry till the

Hot

disappears, then

select another programme.

Cancel the programme

For programmes washing at high

temperatures:

Touch the

Start/Pause

button.

To cool down laundry: Select

Rinse

Touch the

Start/Pause

button.

For programmes washing at low

temperatures:

Touch the

Start/Pause

button.

Select

Spin

Touch the

Start/Pause

button.

For programmes in drying process:

Touch the

Start/Pause

button.

If the

Hot

on the display panel,

waiting for the appliance running to

cool down the laundry till the

Hot

disappears.

Programme end

End

lights up on the display and

and

displays are off.

If you have selected

, the water is only

drained after rinse process, no spin

cycle.

Notes

■

Hot

flashes in the display before

the drying programme ends, the

temperature in the drum is high. The

programme for cooling the drum

runs until the temperature in the

drum has dropped.

■

If you do not take laundry out within

15 mins after drying process

finished, wrinkle guard process will

start to prevent laundry getting

wrinkled. The process lasts about 30

minutes.

0:00,

£‘˜

£©

and

“Ÿš

will

be displayed alternately on the

display and

symbol will be

displayed as the status symbol. You

can touch any button to terminate

this process, then the door will be

released and laundry can be taken

out.

Summary of Contents for WNA254U0IN





















































Search results

Summary of Contents for WNA254U0IN

Reviews:

Related manuals for WNA254U0IN

Brands by name

Popular brands

Bosch WNA254U0IN, Instruction Manual And Installation Instructions

Search results

Summary of Contents for WNA254U0IN

Reviews:

Related manuals for WNA254U0IN

Brands by name

Popular brands