Bosch WNA254U0IN Instruction Manual And Installation Instructions Download Page 37

Page: 37 / 52

Operating the appliance

Filling the dispensers

Pull out the detergent drawer.

Warning

Eye / skin irritation!

If the detergent drawer is opened

while the appliance is running,

detergent/care product may run out.

Carefully open the drawer.

If detergent/care product comes into

contact with eyes or skin, rinse

thoroughly.

If accidentally swallowed, seek

medical advice.

Pour in detergent and/or cleaning

product.

Notes

■

Always follow the manufacturer's

instructions when dosing

all detergents, cleaning aids, care

products and cleaning agents.

■

Dilute viscous fabric softener

and fabric conditioner with water.

This will prevent blockages.

■

Be careful when opening the

detergent drawer while the appliance

is running.

Starting the programme

Touch and hold

Start/Pause

button

for 1~2 seconds, then release the

button. The programme starts and the

appliance door is locked.
The finish-in time is shown in the display

panel and counts down until the

programme starts. After the programme

has started, the programme duration is

displayed. And the symbols for the

programme progress are lighting up.

Childproof lock

You can lock the appliance to prevent

the settings you have set from being

changed inadvertently. To do this,

activate the childproof lock.

To activate the childproof lock:
After the programme starts, Touch and

hold the

Hygiene Care

and

Ready

buttons for 3 seconds. The symbol

lights up in the display panel.

■

lights up: The childproof lock is

activated.

■

flashes: If the programme and

programme settings are adjusted

while childproof lock is activated.

Note:

When the programme ends,

End

is displayed. The door is unlocked.

symbol remain on to remind you to

deactivate the childproof lock.

To deactivate the childproof lock:
Touch and hold the

Hygiene Care

and

Ready in

buttons until the

symbol

disappears.

Dispenser

Detergent for pretreat and

clothing disinfectant. (only for

the appliance with pretreat and

disinfectant function)

Dispenser

Softener, starch. Do not exceed

the maximum load.

Dispenser

Detergent for main wash, water

softener, bleach, stain remover.

Summary of Contents for WNA254U0IN





















































Search results

Summary of Contents for WNA254U0IN

Reviews:

Related manuals for WNA254U0IN

Brands by name

Popular brands

Bosch WNA254U0IN, Instruction Manual And Installation Instructions

Search results

Summary of Contents for WNA254U0IN

Reviews:

Related manuals for WNA254U0IN

Brands by name

Popular brands