Operating the appliance
en
37
Prewash
Prewash for heavily soiled laundry.
Touch
Prewash
to activate or
deactivate it.
Note:
Put the detergent into dispenser
I
and
II
.
Easy Iron
A special operation using reduced spin
speed followed by fluffing to help
reduce creasing.
Touch
Easy Iron
to activate or
deactivate it.
Note:
If
Easy Iron
has been activated,
the laundry will have retained a higher
than average level of moisture after
spinning.
SpeedPerfect
Washing in a shorter time while
achieving a washing result that is
consistent with the normal performance.
Touch
SpeedPerfect
to activate or
deactivate this additional programme
setting.
Note:
With the
SpeedPerfect
additional programme setting activated,
the maximum load of washing will be
reduced, and extra water will be needed
for the washing process.
1
Operating the
appliance
Operating the appliance
Preparing the appliance
The appliance was tested before
delivery. To remove residual water from
the test procedure, the first wash cycle
should be run without laundry using the
Cottons 90°C
programme.
"Before washing for the first time"
Notes
■
Never switch on a damaged
appliance!
■
Inform customer service!
1.
Insert mains plug.
:
Warning
Risk of death from electric shock!
Risk of death if live parts are
touched.
– Never pull out the mains plug by
tugging the power cord.
– Insert/pull out the mains plug
with dry hands only.
2.
Turn the water tap on.
3.
Open the appliance door.
