Bosch WNA14400ID User Manual And Installation Instructions Download Page 14 | Manualshive

Page: 14 / 48

Bosch WNA14400ID User Manual And Installation Instructions Download Page 14

en

Installation and connection

14

5.

Put on the 4 cover caps.

6.

Press down on the 4 cover caps.

4.5 Connecting the appliance

Connecting the water inlet hose

1.

Connect the water inlet hose.

2.

Connect the water inlet hose to a
tap (26.4 mm = 3/4").

3.

Open the water tap carefully and
check that the connection points
are tight.

Water outlet connection types

This information is intended to help
you to connect this appliance to the
water outlet.

ATTENTION!

When draining, the water outlet hose
is subject to water pressure and may
come loose from the installed con-
nection point.

▶

Secure the water outlet hose
against unintentional loosening.

Note:

Observe the draining heights.

The draining heights are: minimum:
60 cm, maximum: 100 cm

Siphon

Secure the con-
nection point with
a (24–40 mm)
hose clamp.

Sink

Fix and secure
the water outlet
hose with an el-
bow
→

.

«
...
12
13
14
15
16
...
»

Summary of Contents for WNA14400ID

















































Reviews:

No comments