Operating the appliance
en
35
1
Operating the
appliance
Operating the appliance
Preparing the appliance
The appliance was tested before
delivery. To remove residual water from
the test procedure, the first wash cycle
should be run without laundry using the
k
Drum Clean
programme.
"Before washing for the first time"
Notes
■
Never switch on a damaged
appliance!
■
Inform customer service!
1.
Insert mains plug.
:
Warning
Risk of death from electric shock!
Risk of death if live parts are
touched.
– Never pull out the mains plug by
tugging the power cord.
– Insert/pull out the mains plug
with dry hands only.
2.
Turn the water tap on.
3.
Open the appliance door.
Select programme/switch on
the appliance
Note:
If you have activated the
childproof lock, you must first deactivate
it before you can set a programme.
Use the programme selector to select
the required programme. The
programme selector can be rotated in
either direction.
The appliance is switched on.
The
programme default settings
for the
selected programme alternately appear
in the display panel:
■
The maximum load and
■
the duration of the programme and
■
...
Adjusting the selected
programme
Changing default settings
You can use the displayed default
settings or adjust the selected
programme by touching the relative
buttons to fit the laundry care needs.
e.g.
°C Temp.
,
0
Spin Speed
,
¢
Finish In
.
Note:
The buttons are sensitive, they
only need to be touched gently. If the
button
°C Temp.
,
0
Spin Speed
,
¢
Finish In
is held down, the setting
options are automatically scrolled
through.
