Bosch WKD28541EE, Instruction Manual And Installation Instruction

Page: 26 / 36

26
Removing the transport
safety bolts
Unscrew all screws using
the
spanner supplied.
Remove all transport safety bolts completely
and take the mains cable out of the retainers.
Insert the protective
covers.
– Before using the appliance for the first
time, you must make sure that
all
transport safety bolts have been removed
and kept safe for any subsequent
transport.
– If you need to transport the appliance at a
later date, always refit the transport safety
bolts to prevent damage to the washer-
dryer.
Positioning and
levelling
– Appliance stability is essential to ensure that the washer-dryer does not
“creep” during spin cycles.
– The installation area must be firm, clean and level.
– Parquet floors and soft floor coverings, e.g. carpets or foam-backed
floor coverings, are unsuitable.
Positioning
Slide sheets make it easier to slide the washing machine into the
installation recess.
– Can be ordered from the after-sales service, spare part no. 66 1827.
– Moisten the slide sheets with a mixture of water and washing-up liquid
before sliding the washer-dryer into place. Do not use grease and/or
oil.