background image

8

Control panel

       

Indicator lamp

Indicates the settings that have been 
selected for:
– Spin speed: 

- 1400 rpm.

– Options/signal.

 

Display panel

Shows the settings that have been selected (e.g. spin speed, 
drying time), the progress of the current programme and the 
programme status.

Programme progress

T

    

N

   

0    

Pre-wash, Main wash, Rinse, Final spin, 

Drying.

Auxiliary displays

2       

%   

  E

 

l

  

 

kg  

Finished in time, Programme start, Childproof 

lock, Fluff removal cycle, recommended load.

Indicator lamp

Display panel

Washing and drying options 

–> page

 

15

(Spin speed):

 individual adjustment of the spin 

speed.

option button:

 sets washing options.

set:

 activation/deactivation of the selected 

washing options.

 (Finished in time) 

 

:

 delays the Programme start.

5

 (Drying):

 sets the drying options

A

 (Start/Pause):

 

starts and stops the washing programme –> page

 

16.

Buttons

Programme selector 

–> page

 

13

For switching the washer-dryer on and 
off and for selecting the programme, can 
be turned in both directions. Do not 
adjust the programme selector while 
washing/drying is in progress.

Programme selector

Summary of Contents for WKD28351GC





































Reviews: