Troubleshooting
en
55
Malfunctions
Fault
Cause
troubleshooting
The appliance is not work-
ing.
The mains plug of the power
cord is not plugged in.
▶
Connect the appliance to the power
supply.
The circuit breaker is faulty.
▶
Check the circuit breaker in the
fuse box.
There has been a power cut.
▶
Check whether the lighting in your
kitchen or other appliances are
working.
The programme does not
start.
You have not pressed
Start /
Reload
.
▶
Press
Start / Reload
.
Door is not closed.
1.
Close the door.
2.
Press
Start / Reload
to start the
programme.
Childproof lock is activated.
▶
Finish in
is activated.
▶
Check whether
Finish in
is activ-
ated.
Laundry is caught in the
door.
1.
Open the door again.
2.
Remove any trapped laundry.
3.
Close the door.
4.
Press
Start / Reload
to start the
programme.
The door cannot be opened. – – – is activated.
▶
Continue the programme by select-
ing
Spin
or
Drain
and pressing
Start / Reload
.
the programme status is Rinse
Hold", Page 44
The temperature is too high.
▶
Wait until the temperature has
dropped.
▶
Water level is too high.
▶
Start the
Drain
programme.
Power failure.
▶
Open the door using the emergency
release.
The water is not draining.
Drain pipe or water outlet
hose is blocked.
▶
Clean the drain pipe and the water
outlet hose.
Summary of Contents for WIW28501GB
Page 67: ......