Bosch WGG256ACFG Page 41 User Manual And Installation Instructions Download

Page: 41 / 56

TroubleshootingNL

Malfunction

flashes.

Cause and Troubleshooting
Door is not closed.

Close the door.

To start the program, pressStart/Refill.

Laundry is wedged in the door.

Open the door again.

Remove trapped laundry.

Close the door.

To start the program, pressStart/Refill.

All other error codes.

Malfunction

▶

Please contact customer service.

→

†Customer Service", page 49

"E:30/-20"

Solenoid valve defective.

▶

Please contact customer service.

→

†Customer Service", page 49

Detergent dosage is too high.

▶

Reduce the amount of detergent for the next wash

with an equal load.

Additional water filled.

▶

Do not fill the device with additional water during

operation.

Device not working.

Mains plug of the power cable is not plugged in.

▶

Connect the appliance to the mains.

The fuse in the fuse box has tripped.

▶

Check the fuse in the meter box.

Power supply has failed.

▶

Check whether the interior lighting or other

appliances are working.

Program does not start.

Start/Reloadwas not pressed.

▶

PressStart/Refill.

Door is not closed.

Close the door.

To start the program, pressStart/Refill.

Child lock is activated.

▶

→

†Deactivate child lock", page 34

Ready inis activated.

Summary of Contents for WGG256ACFG

























































Search results

Summary of Contents for WGG256ACFG

Reviews:

Related manuals for WGG256ACFG

Brands by name

Popular brands

Bosch WGG256ACFG, User Manual And Installation Instructions

Search results

Summary of Contents for WGG256ACFG

Reviews:

Related manuals for WGG256ACFG

Brands by name

Popular brands