Bosch WGG256A5NL Page 13 User Manual And Installation Instructions Download

Page: 13 / 60

Set up and connectNL

3.3 Energy Saving Mode

4.2 Package contents

If you do not operate the device for a

longer period of time, it

automatically switches to energy-

saving mode.

The energy saving mode is exited

when you operate the device again.

After unpacking, check all parts for

transport damage and the

completeness of the delivery.

PAY ATTENTION!

Use with incomplete or defective

accessories may impair the function

of the device or cause material

damage and damage to the device.

▶

Do not use the device with

incomplete or defective accessories.

▶

Replace the accessories before

using the device.

→

†Accessories", Page 31

4 Set up and connect

4.1 Unpacking device

PAY ATTENTION!

Objects that remain in the drum and

that are not intended for use with the

device can lead to material and device

damage.

▶

Before use, remove all these items

and the supplied accessories from

the drum.

Remark:The device has been checked

at the factory for correct operation.

Water stains may remain in the

device. The stains disappear after the

first wash.

The delivery consists of: †

Washing machine

†Accompanying documents †

Transport protections

→

†Remove transport locks", page

†cover caps

†Water supply hose

→

†Connecting the water inlet hose",

page 16

Completely remove packaging

material and protection from the

device.

→

†Disposal of the packaging",

Page 12

Check the device for visible

damage.

Open the appliance door.

→

†The Ministry in Essence",

Page 32

4.3 Installation site

requirements

Remove the accessories from the

drum.

Close the appliance door.

WARNING

Risk of electric shock!

The device contains live parts.

Touching live parts is dangerous.

▶

Do not use the appliance without

a cover.

Summary of Contents for WGG256A5NL





























































Search results

Summary of Contents for WGG256A5NL

Reviews:

Related manuals for WGG256A5NL

Brands by name

Popular brands

Bosch WGG256A5NL, User Manual And Installation Instructions

Search results

Summary of Contents for WGG256A5NL

Reviews:

Related manuals for WGG256A5NL

Brands by name

Popular brands