background image

Childproof lock

 en

31

1.

Set the 

Centrifugering

 programme

or a programme for draining the
water. 
→ 

"Programmes", Page 24

2.

Press 

.

13.11 Unloading the laundry

1.

Open the door.

2.

Remove the laundry from the
drum.

13.12 Switching off the appli-

ance

1.

Turn the programme selector to  .

2.

Turn off the tap.

3.

Wipe the rubber gasket dry and re-
move any foreign objects.

4.

Leave the appliance door and de-
tergent drawer open so that resid-
ual water can evaporate.

14 Childproof lock

Secure your appliance against being
operated unintentionally using the
controls.

14.1 Activating the childproof

lock

Press and hold the two 

3 sek.

buttons for approx. 3 seconds.

a

The display shows .

a

The controls are locked.

a

The childproof lock remains active
even after the appliance has been
switched off and in the event of a
power failure.

14.2 Deactivating the child-

proof lock

Requirement:

 To deactivate the

childproof lock, the appliance must
be switched on.

Press and hold the two 

3 sek.

buttons for approx. 3 seconds.

a

goes out in the display.

Summary of Contents for WGG2540ESN





















































Reviews: