NL Before first use
V
6 Before first use
for the first use
7.
Start the first wash cycle or turn
the program selector to from to
turn off the device.
V
Prepare the device for use.
for the first use
6.1 Starting a wash cycle
without laundry
Your device has been thoroughly
checked before leaving the factory.
To remove any residual water, wash
without any laundry the first time.
1.
Turn the program selector on Cleaning the
drum to make.
2.
Close the door.
3.
Pull out the detergent drawer.
4.
Fill powder detergent into
compartment II.
To avoid foaming, use only half the
amount recommended by the
detergent manufacturer for light
soiling. Do not use wool or delicate
detergent.
5.
Slide in the detergent drawer.
6.
Press Start/Refill to start the
program.
a The display shows the remaining
program duration.
a After the program end, it shows
display: "-0-".
20
