en use
G
6
use
Before the first
use
5.
Pour powder detergent into
compartment II.
G
B
use
prepare the device for use.
6.1 Start empty wash cycle
Your device has been thoroughly
tested before leaving the factory. To
remove any residual water, wash
without laundry for the first time.
1.
Open the program selectorClean
drumplace.
To avoid foaming, use only half the
amount of detergent recommended
by the detergent manufacturer for
light soiling. Do not use wool
detergent or mild detergent.
2.
Close the door.
3.
Pull out the detergent drawer.
4.
Fill about 1 liter of tap water into
chamber II.
6.
Push in the detergent drawer.
7.
To start the program, click Start/
Reloadto press.
aThe display shows the remaining
program duration.
aThe display shows after program
mende: "End".
8th.
Start the first wash cycle or open
the program selector Out ofto
turn off the device.
20
