Installation and connection
en-us
13
The specified size of the ventilation opening applies per
position and is not supposed to be shared out between up-
per and lower position..
4.5 Removing the transit bolts
The appliance is secured for transportation using transit
bolts on the rear of the appliance.
Note:
Keep the transit bolt screws and the sleeves in a
safe place for future transport
1.
Pull the hoses out of the holders.
2.
Unscrew and remove all 4 screws for the transit
bolts with a WAF 13 wrench.
3.
Remove the power cord from the holder.
4.
Remove the 4 sleeves.
5.
Put on the 4 cover caps.
