Intelligent dosing system
en
31
Initial use/filling the
dispensers
Refer to the manufacturer's instructions
when choosing your detergent and
fabric softener. We recommend the use
of standard, universal and colour liquid
or gel detergents for all machine-
washable, coloured fabrics made of
cotton or synthetic materials.
Notes
■
Only use easy-pour liquid products
and gels that the manufacturer
recommends adding to the
detergent drawer.
■
Do not mix different liquid
detergents. If changing your liquid
detergent (type, manufacturer, etc.),
empty the dispenser completely and
■
Do not use products containing
solvents, caustic agents or volatile
substances (e.g. bleach).
■
Do not mix detergent and fabric
softener.
■
Do not use products that have
expired or are highly congealed.
■
To prevent drying out, do not leave
the dispenser lids open for a long
period of time.
Filling the dispensers:
The dispenser covers in the detergent
drawer are marked with the following
symbols:
■
ß
Standard/universal detergent
■
i
/
ß
Fabric softener
1.
Open the detergent drawer.
2.
Open the dispenser cover(s).
3.
Add detergent/fabric softener.
Do not fill above the
max.
marking.
4.
Close the cover(s).
5.
Slowly push the detergent drawer in
completely.
When the appliance is switched on, the
fact that the detergent drawer is closed
completely is indicated by the following:
■
the corresponding illuminated
display on the drawer handle lights
up when intelligent dosing i-DOS
w
,
i-DOS
i
I
w
is selected.
■
the display flashes once and then
goes out if intelligent dosing is not
selected.
Everyday use
Illuminated displays on the drawer
handle:
■
The display
lights up
if intelligent
dosing is selected for the
corresponding dispenser:
–
w
for dispenser
ß
(detergent),
– for the
i
I
w
illuminated display for
the combined compartment
i
/
ß
,
the lamp for the appropriate
dispenser content lights up:
i
for fabric softener/
w
for
■
The display
flashes
if the fill level of
the selected intelligent dosing
dispenser is below the minimum
level.
