en
Programme default settings
22
Starching
Note:
Laundry should not be treated
with fabric softener.
1.
Switch on the appliance.
2.
Select the
Rinse / Freshen Up
programme.
3.
Pour liquid starch into
compartment
v
u
in accordance
with the manufacturer's instructions
(clean first if necessary).
4.
Press the
A
button.
Dyeing/bleaching
Dye should only be used in normal
household quantities. Salt may damage
stainless steel. Always follow the dye
manufacturer's instructions.
Do
not
use the washing machine to
bleach clothes.
0
Programme default
settings
Programme default settings
The programme default settings are
displayed in the main menu after
selecting the programme.
Display panel
You can change the default settings:
■
Temperature , Spin speed and
Ready in as long as the arrow is
displayed in the main menu and/or
■
,
An overview of all programme settings,
which can be selected depending on
the programme, can be found from
Temperature
(Temperatura)
Depending on what stage the
programme is in, you can change the
set temperature before and during the
programme.
The maximum temperature that can be
set depends on the programme that has
been selected.
Spin speed
(Centrifuga)
Depending on what stage the
programme is in, you can change the
spin speed (in rpm; revolutions per
minute) before and during the
programme.
Auto. Intensive
(Auto Intensivo) *
More intensive treatment of the laundry;
The degree of soiling and the type of fabric are automatically detected
and the washing sequence and intelligent dosing are adjusted
accordingly.
Max. 6 kg
60 °C
1400** rpm
$
,
Á
Detergent
è
, fabric softener
è
Programme/Type of laundry/Instructions
Settings
* The programmes and additional programme settings are model-dependent. The programmes/settings
that are available can either be selected directly on the control panel or under
Additional programs
Programmes or
Options
(Opzioni).
** The maximum spin speed depends on the programme and model
*** Reduced load for the
TurboPerfect
(
(
) setting
