Operating the appliance
en
45
Adding laundry
After starting the programme, you can
add or remove laundry if necessary.
Press the
A
button to do this.
The
A
button indicator lamp flashes
and the machine checks whether it is
possible to add laundry.
It is possible to add laundry when
Pause: Reload is possible
appears on
the display.
To continue the programme, press the
A
button. The programme continues
automatically.
Notes
■
Do not leave the door open for too
long when adding laundry as water
from the laundry may leak out.
■
For safety reasons, the door remains
locked when the water level or
temperature is high, or while the
drum is turning, and it is not possible
to add laundry during this time.
Follow the information on the display
panel.
■
The load display is not active during
reloading.
Changing the programme
If you have started the wrong
programme by mistake, you can
change the programme as follows:
1.
Press the
A
button.
2.
Select another programme.
3.
Press the
A
button. The new
programme starts from the
beginning.
Cancel the programme
For programmes at high temperatures:
1.
Press the
A
button.
2.
To cool down laundry: Select
Rinse
.
3.
Press the
A
button.
For programmes at low temperatures:
1.
Press the
A
button.
2.
Select
Spin
or
Drain
.
3.
Press the
A
button.
Programme end during rinse
hold
The following appears on the display
panel:
Continue the programme by:
■
Select the
Spin
(change the spin
speed if necessary) or the
Drain
programme.
■
Press the
A
button.
Programme end
ÿ
Finished, remove washing
appears
on the display panel. The
A
button
indicator lamp is off.
6HOHFWVSLQRUGUDLQ
5LQVHKROGUHDFKHG
DQGWKHQVWDUW
6SLQ
'UDLQ
