Home Connect
en
49
3.
Select
off
.
a
Wi-Fi is deactivated
Note:
If Wi-Fi is switched off and your
appliance was previously connected to
your home network, this connection will
be re-established automatically when
Wi-Fi is switched back on.
Software update
Requirement:
The display shows
New
software successfully installed. A
new software version is available. Do
you want to update the software now?
This may take several minutes.
.
1.
Press and hold for approx. 3
seconds.
2.
Select
Software update
.
3.
Select
Install now
.
a
The software update starts.
Note:
The software update may take
several minutes. Do not switch off the
appliance while the software update is
in progress.
Resetting the appliance net-
work settings
1.
Press and hold for at least
3 seconds.
2.
Select
Network settings
.
3.
Select
Reset
.
a
The network settings are reset.
Tip:
If you wish to operate your appli-
ance again via the Home Connect app,
you will need to reconnect it to the Wi-
Fi and to the Home Connect app.
Remote diagnostics
Customer Service can use Remote Dia-
gnostics to access your appliance if
you contact them, have your appliance
connected to the Home Connect server
and if Remote Diagnostics is available
in the country in which you are using
the appliance.
Tip:
For further information and details
about the availability of Remote Dia-
gnostics in your country, please visit
the service/support section of your
local website: www.home-connect.com
Data protection
Please see the information on data pro-
tection.
The first time your appliance is
registered on a home network
connected to the Internet, your
appliance will transmit the following
types of data to the Home Connect
server (initial registration):
¡
Unique appliance identification (con-
sisting of appliance codes as well as
the MAC address of the Wi-Fi com-
munication module installed).
¡
Security certificate of the Wi-Fi com-
munication module (to ensure a se-
cure data connection).
¡
The current software and hardware
version of your appliance.
¡
Status of any previous reset to fact-
ory settings.
This initial registration prepares the
Home Connect functions for use and is
only required when you want to use the
Home Connect functions for the first
time.
Note:
Please note that the Home Con-
nect functions can only be utilised with
the Home Connect app. Information on
data protection can be retrieved in the
Home Connect app.
Declaration of Conformity
Robert Bosch Hausgeräte GmbH
hereby declares that the appliance with
Home Connect functionality meets the