en
Familiarising yourself with your appliance
32
Buttons
Below is an overview of the buttons
and their setting options.
With the
button, you can open the
sub-menu for additional programme
settings. The additional programme set-
tings are listed in the overview for the
buttons.
The selection of programme settings
depends on the selected programme.
You can see the selection options for
each programme in the overview for
→
.
Button
Selection
Description
(Start/Reload)
¡
Start
¡
Cancel
¡
Pause
Start, cancel or pause the programme.
(SpeedPerfect)
¡
Activate
¡
Deactivate
Activate or deactivate a short washing programme.
Note:
Energy consumption increases.
The washing result is not affected by this.
(Power Rinse)
¡
Activate
¡
Deactivate
Activate or deactivate an extended washing pro-
gramme.
The programme duration is extended by up to 30
minutes.
Suitable for heavily soiled laundry.
Stains
Multiple selection
Select the type of stain.
The temperature, drum movement and soaking
time are all adjusted to suit the type of stain.
i-DOS
¡
Activate
¡
Deactivate
¡
Dispenser contents
¡
Basic dosage
Briefly press the button to activate or deactivate the
intelligent dosing system for fabric softener or li-
quid detergent .
Press the button for approx. 3 seconds to open the
basic settings and specify the contents of the dis-
penser or set the basic dosage.
"Overview of the basic settings", Page 50
"Intelligent dosing system", Page 44
(Finish in)
1–24 hours
Set the programme end.
The programme duration is already included in the
set number of hours.
Once the programme has started, the programme
duration is displayed.
(Temperature)
– 90 °C
Adjust the temperature in °C.
(Spin Speed)
0 – 1600 rpm
Adjust the spin speed or deactivate the spin cycle.
If 0 is selected, the water is drained and the spin
cycle is deactivated at the end of the washing cycle.
The laundry stays wet inside the drum.
