![Bosch WAX32LP0SN User Manual And Installation Instructiions Download Page 39](http://html.mh-extra.com/html/bosch/wax32lp0sn/wax32lp0sn_user-manual-and-installation-instructiions_52427039.webp)
Basic operation
en
39
¡
Do not use the measuring aid for
liquid detergent for gel detergents,
washing powder, or if Prewash or
"Ready in" time are activated.
¡
Observe the information about de-
tergents and care products
→
1.
Pull out the detergent drawer.
2.
Pour in detergent.
→
3.
If required, add the care product.
4.
Push in the detergent drawer.
13.8 Starting the programme
Note:
If you want to change the time
until the programme ends, set the
"Ready in" time first.
▶
Press
.
a
The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a
The display shows either the pro-
gramme duration or the "Ready in"
time.
a
If you start a programme with act-
ive oxygen, the drum lights up
after the programme starts and the
mist that is created can be seen.
a
After the programme has ended,
the display shows:
-0-
.
13.9 Soaking laundry
Note:
No additional detergent is re-
quired. The washing solution is then
used for washing.
1.
Start the programme.
2.
To pause the programme, after ap-
prox. 10 minutes, press
.
3.
To resume the programme, after
the desired soaking time, press
.
13.10 Adding laundry
Notes
¡
Observe the information on safety
→
.
¡
If you a start a programme with
active oxygen, you cannot add any
laundry after the programme has
started.
1.
Press
.
The appliance pauses.
Note:
If appears, it is not pos-
sible to add laundry.
When goes out, it is possible to
add laundry.
2.
Open the appliance door.
3.
Add or remove laundry.
4.
Close the appliance door.
5.
Press
.
13.11 Cancelling the pro-
gramme
Notes
¡
Observe the information on safety
→
.
¡
If you cancel a programme with
active oxygen, the door will remain
locked for up to 25 minutes until
there is no longer any active oxy-
gen in the drum. and flash while
the active oxygen is being re-
moved. The door is then unlocked.
1.
Press
.
2.
Open the appliance door.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the
Rinse
programme.