background image

en 

Transportation, storage and disposal

54

18.1 Emergency release

Releasing the door

Requirement:

 The drain pump is

empty. → 

Page 39

1.

ATTENTION!

 Escaping water may

cause material damage.

Do not open the door if you can
see water through the glass.
Pull the emergency release down-
wards with a tool and release.

a

The door lock is released.

2.

Insert the maintenance flap and
lock it into place.

3.

Close the maintenance flap.

19 Transportation, stor-

age and disposal

19.1 Removing the appliance

Note: 

You can find further information

in the digital instruction manual by
scanning the QR code in the table of
contents or on www.bosch-
home.com.

1.

Turn off the tap.

2.

Empty the water inlet hose.

3.

Switch off the appliance.

4.

Unplug the appliance's mains plug.

5.

Drain the water. 
→ 

"Cleaning the drain pump",

Page 39

6.

Detach the hoses.

7.

Empty the dispensers.

19.2 Inserting the transit

bolts

Secure the appliance for transporta-
tion using transit bolts in order to pre-
vent damage.

1.

Use a screwdriver to remove the 4
cover caps.

Keep the cover caps.

2.

Install the 4 transit bolts. Refer to
the description 
→ 

"Removing the transit bolts",

Page 13

 for this and proceed in re-

verse order.

19.3 Using the appliance

again

For further information, see 
→ 

"Installation and connection",

Page 12

 and 

→ 

"Starting an empty washing

cycle", Page 20

.

Summary of Contents for WAX32K04BY





























































Reviews: