Cleaning and servicing
en
57
Basic setting
Description
Software update
Install the soft-
ware update.
→
Network settings
energy mngmt.
Connect the ap-
pliance to the en-
ergy manager.
→
17.2 Changing the basic set-
tings
1.
To call up the basic settings for
the sub-menu, press and hold both
buttons
Ajustes 3 seg.
for approx.
3 seconds.
2.
Select the required basic setting.
→
"Overview of the basic settings",
3.
Adjust the basic setting.
4.
Press
Ajustes 3 seg.
to call up the
main menu.
Cleaning and servicing
18 Cleaning and servi-
cing
Cleaning and servicing
To keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.
18.1 Tips on appliance care
Wipe down the
housing and the
control panel
with nothing but
water and a
damp cloth.
This ensures the
parts of the appli-
ance will remain
clean and hy-
gienic.
Remove all de-
tergent residue,
spray residue or
other residues
immediately.
Fresh deposits
are easier to re-
move without
leaving any
residue.
Keep the appli-
ance door and
detergent drawer
open after use.
This allows the
residual water to
dry, reducing
odours in the ap-
pliance.
18.2 Cleaning the drum
CAUTION
Risk of injury!
Permanently washing at low temper-
atures and a lack of ventilation for
the appliance may damage the drum
and cause injury.
▶
Regularly run a programme for
cleaning the drum or wash at tem-
peratures of at least 60 °C.
▶
Leave the appliance to dry after
every operation with the door
open, and leave the detergent
drawer to dry.
▶
Run the
Drum clean
programme
without laundry.
Add washing powder.
18.3 Cleaning the detergent
drawer
If you change detergent or the deter-
gent drawer is dirty, clean the deter-
gent drawer and the pump unit of the
intelligent dosing system.
Note:
Please read the information in
the Safety →
sections
to ensure that you use the appliance
safely.
1.
Switch off the appliance.
2.
Pull out the detergent drawer.
