background image

en

    Home Connect

50

Connecting to the Home 

Connect app

If your appliance is connected to your 

home network, you can connect it to the 

Home Connect app.

1.

Switch the appliance on.

2.

Press and hold the 

Remote start 

(

}

button for more than 3 seconds.

‘ž£

 (connect automatically) will 

appear on the display panel.

3.

Turn the programme selector to 

position 3. 

‘˜˜

 (connect to app) will 

appear on the display panel.

4.

Press the Start button.

The appliance will now connect to 

your Home Connect app.

5.

Open the Home Connect  app on 

your smartphone or tablet PC and 

select 

Connect

 to add your new 

appliance.

Note:  

If your smartphone or 

tablet PC is still connected to the 

Home Connect

 network, you will 

need to connect it to your home 

network first.

6.

If your appliance is not shown 

automatically, select 

Appliance 

search

 and then 

Connect an 

appliance

 in the 

Home Connect app.

7.

Carry out the last steps in the 

Home Connect app to connect your 

appliance.

If the appliance has connected 

successfully, 

™©Ÿ

 (connected) will 

appear on the display panel.

8.

You can exit the Home Connect 

settings by pressing the 

Remote 

start 

(

}

) button.

Note:  

If a connection could not be 

established, 

“§§ 

 (fault) will appear on 

the display panel. Check whether your 

smartphone or tablet PC is in range of 

your home network and whether it is 

connected to it. Try connecting to the 

Home Connect app again.

Switching Wi-Fi on and off

You can switch the Home Connect 

function on your appliance on or off 

permanently at any time.

1.

Switch the appliance on.

2.

Press and hold the 

Remote start 

(

}

button for more than 3 seconds.

‘ž£

 (connect automatically) will 

appear on the display panel.

3.

Turn the programme selector to 

position 4. 

’©Ÿ

 (Wi-Fi function) will 

appear on the display panel.

Summary of Contents for WAWH26M9SN





































































Reviews: