Home Connect
en
49
Connecting to your home
network manually
If you have already automatically
connected your appliance to your home
network, you can skip the manual
connection step and connect it to the
Home Connect app .
If your router does not have a WPS
function, you will need to connect the
appliance to your home network
manually.
Wi-Fi must be switched on on the
appliance.
1.
Switch the appliance on.
2.
Press and hold the
Remote start
(
}
)
button for more than 3 seconds.
‘ž£
(connect automatically) will
appear on the display panel.
3.
Turn the programme selector to
position 2.
†‘˜
(connect manually)
will appear on the display panel.
4.
Press the Start button to connect.
†
will flash on the display panel.
The appliance will now set up its
own Wi-Fi network with the name
(SSID)
Home Connect
, which you
can access from your smartphone or
tablet PC.
5.
Call up the Wi-Fi settings on your
smartphone or tablet PC.
6.
Connect your smartphone or
tablet PC to the
HomeConnect
Wi-Fi
network and enter the password
(key) “
HomeConnect
”.
Note:
The connection process may
take up to 60 seconds.
7.
Once you have connected
successfully, open the
Home Connect app on your
smartphone or tablet PC.
8.
In the Home Connect app, enter the
name (SSID) and password (key) for
your home network
and then select
Transfer to appliance
.
If the appliance has connected to your
home network successfully,
™©Ÿ
(connected) will appear on the display
panel and
†
will be lit continuously.
9.
You can exit the Home Connect
settings by pressing the
Remote
start
(
}
) button.
Notes
■
If a connection could not be
established,
“§§
(fault) will appear
on the display panel.Check whether
your appliance is in range of your
home network and try connecting
manually again.
■
If your smartphone or tablet PC is
still connected to the
Home Connect
network, you will need to connect it
to your home network first.
