en
Overview of programmes
36
Starching
Note:
Laundry should not be treated
with fabric softener.
1.
Switch on the appliance.
2.
Select the
'
Rinse
programme.
3.
Pour liquid starch into
compartment
v
u
in accordance
with the manufacturer's instructions
(clean first if necessary).
4.
Press the
A
button.
Dyeing/bleaching
Dye should only be used in normal
household quantities. Salt may damage
stainless steel. Always follow the dye
manufacturer's instructions.
Do
not
use the washing machine to
bleach clothes.
Soaking
1.
Switch on the appliance.
2.
Select the
i
Cottons 30 °C
programme.
3.
Use i-DOS to dose your detergent or
add it to compartment
v
u
in
accordance with the manufacturer’s
instructions.
4.
Press the
A
button. The
programme starts.
5.
After approx. 10 minutes, press the
A
button to pause the programme.
6.
Leave the laundry to soak for as long
as required, then either press the
A
button again to continue the
programme or change the
programme.
Notes
■
Load laundry of the same colour.
■
No additional detergent is required;
the soaking solution is used for
washing.
***
Auto. Intensive
p
More intensive treatment of the laundry;
the degree of soiling and the type of fabric are automatically
detected, and the washing sequence and intelligent dosing are
adjusted accordingly.
Max. 6 kg
60 °C
$
, 1400 rpm
-
Detergent
è
, fabric softener
è
***
Shirts
’
Non-iron shirts or blouses made of cotton, linen, synthetic fibres
or blended fabrics
Note: .
Use the
“
Delicates / Silk
programme to wash shirts/
blouses made of silk or delicate fabrics.
Max. 2 kg
Ž
- 60 °C
$
, 0 - 800 rpm
EcoPerfect, SpeedPerfect,
Prewash (
T
),
Water plus (
Z
)
Detergent
è
, fabric softener
è
Programme/Type of laundry/Instructions
Settings
* Reduced load for the
SpeedPerfect
setting
** Max. spin speed depends on the model
*** Programme depends on the model
