en
Overview of programmes
32
Starching
Note:
Laundry should not be treated
with fabric softener.
Liquid starch can be used to stiffen
fabrics particularly in the Rinse and
Cottons programmes. Measure starch
into compartment
M
in accordance with
the manufacturer's instructions (clean
first if necessary).
Dyeing/bleaching
Dye should only be used in normal
household quantities. Salt may damage
stainless steel. Always follow the dye
manufacturer's instructions.
Do
not
use the washing machine to
bleach clothes.
Soaking
1.
Switch on the appliance.
2.
Select the
Cottons 30 °C
programme.
3.
Pour soaking agent/detergent into
compartment
II
in accordance with
the manufacturer’s instructions.
4.
Press the
A
button. The
programme starts.
5.
After approx. 10 minutes, press the
A
button to pause the programme.
6.
Leave the laundry to soak for as long
as required, then either press the
A
button again to continue the
programme or change the
programme.
Notes
■
Load laundry of the same colour.
■
No additional detergent is required;
the soaking solution is used for
washing.
***
Duvet
Machine-washable items stuffed with synthetic fibres, such as
pillows, quilts and bedspreads; also suitable for items stuffed
with down
Note: .
Wash large items separately. Use a detergent designed
for delicates and follow the instructions on the item's care label.
Use detergent sparingly.
Max. 2.5 kg
Ž
- 60 °C
$
- 1200 rpm
EcoPerfect
F
, SpeedPerfect
(
,
Rinse Plus
'
Shirts / Blouses
Non-iron shirts or blouses made of cotton, linen, synthetic fibres
or blended fabrics
Notes
■
Shirts/blouses are only given a short spin on the
Easy Iron
p
setting. Hang them up to dry while still dripping wet.
–> Self-smoothing effect
■
Use the
Delicate / Silk
programme to wash shirts/blouses
made of silk or delicate fabrics.
Max. 2 kg
Ž
- 60 °C
$
- 800 rpm
EcoPerfect
F
, SpeedPerfect
(
,
Easy Iron
p
,
Rinse Plus
'
Programme/type of laundry/information
Settings
* Reduced load for the
SpeedPerfect
(
setting
** Max. spin speed, depending on the model
*** Programme depending on the model
