en
Installation and connection
16
2
1
2.
Connect the water inlet hose to a tap
(26.4 mm = 3/4").
¾˝
min.
10 mm
3.
Open the water tap carefully and
check that the connection points are
tight.
Water outlet connection types
This information is intended to help you
to connect this appliance to the water
outlet.
Note:
Please read the safety informa-
to ensure that you use
the appliance safely.
ATTENTION!
When draining, the water outlet hose is
subject to water pressure and may
come loose from the installed connec-
tion point.
▶
Secure the water outlet hose against
unintentional loosening.
Drainage into a siphon.
Secure the connection
point with a (24–40
mm) hose clamp.
Drainage into a wash
basin.
Fix and secure the wa-
ter outlet hose with an
elbow
.
Drainage into a plastic
pipe with rubber sleeve
or into a gully.
Fix and secure the wa-
ter outlet hose with an
elbow
.
Connecting the appliance to the
electricity supply
Note:
Please read the safety informa-
the appliance safely.
1.
Insert the mains plug of the appli-
ance's power cable in a socket
nearby.
The connection details of the appli-
ance can be found under Technical
data →
.
2.
Check the mains plug is inserted
properly.
Aligning the appliance
In order to reduce noise and vibration
and to prevent the appliance from mov-
ing, align the appliance correctly.
Note:
Please read the safety informa-
the appliance safely.
1.
Loosen the lock nuts using a WAF
17 wrench by turning it in a clock-
wise direction.
