Set up and connect NL
PAY ATTENTION!
installation site
Requirements
If the appliance is installed in areas
with a risk of frost or outdoors, frozen
residual water can damage the
appliance and frozen hoses can
rupture or burst.
▶
Do not operate the appliance in a frost-sensitive
placed or placed outside and used.
The device was subjected to a function
test before leaving the factory and
may contain residual water. This
residual water can leak if the
appliance is tilted more than 40°.
▶
Carefully tilt the device.
on a wall
no snakes
between wall and
device clamping
man.
4.4 Transportation
protections
remove
The device is secured for transport
with transport locks at the rear of the
device.
Remarks
installation site
Requirements
¡ Take the information about the
subject security
be aware of your appli-
to use safely.
¡ Keep the transport safeguards,
the bolts and sleeves for future
On a pedestal
The device with
confirm.
On a floor with The appliance on
a water resistant
old wooden plate
places, which
screwed to the
floor. The
wooden plate
must be at least
be 30mm thick.
1.
Pull the hoses out of the holders.
wooden beams
In a kitchen
¡ A niche width
of 60 cm is
necessary.
¡ The device
only under
a continuous
pend worksheet
place, which
stuck with the
adjacent
cabinet is connected
Pine tree.
15
