background image

en 

Environmental protection and saving energy

12

Remove all detergent residue,
spray residue or other residues
immediately if they come into
contact with the appliance.

Environmental protection and saving energy

Environmental protection
and saving energy

Environmental protection and saving energy

Help protect the environment by us-
ing your appliance in a way that con-
serves resources and by disposing of
reusable materials properly.

Disposing of packaging

The packaging materials are environ-
mentally compatible and can be re-
cycled.

Sort the individual components by
type and dispose of them separ-
ately.
Information about current disposal
methods are available from your
specialist dealer or local authority.

Save energy and conserve re-
sources

If you follow these instructions, your
appliance will use less electricity and
less water.

Choose programmes with low tem-
peratures and longer wash times and
use "maximum load capacity"
→ 

Page 28

.

Energy consumption and water
consumption is most efficient.

Use the economy programme set-
tings.

If you adjust the programme set-
tings for a programme, the display
shows the expected consumption.

"Add " → 

Page 39

 detergent based

on the laundry's degree of soiling.

For light to normal soiling, a smal-
ler amount of detergent is suffi-
cient. Observe the dosage recom-
mendation from the detergent
manufacturer.

Reduce the washing temperature for
lightly and normally soiled laundry.

At low temperatures, the appliance
consumes less energy. For light to
normal soiling, lower temperatures
than indicated on the care label
are also sufficient.

Set the maximum spin speed if you
want to dry the laundry in a tumble
dryer afterwards.

The drier the laundry, the shorter
the programme duration when dry-
ing which, in turn, reduces energy
consumption. A higher spin speed
reduces the residual moisture in
the laundry and increases the
volume of the spin noise.

Wash the laundry without prewash.

Washing with prewash increases
the programme duration and in-
creases energy and water con-
sumption.

The appliance has a continuous
automatic load adjustment function.

Depending on the type of fabric
and load capacity, the continuous
automatic load adjustment func-
tion optimally adjusts the water
consumption and programme dur-
ation.

Summary of Contents for WAU28PS9SN









































































Reviews: