Additional programme settings
en
31
Reduced Ironing
Q
Reduces creasing thanks to a special
spin sequence followed by fluffing and
reduced spin speed.
Note:
The washing's residual moisture
is increased.
Prewash
T
For heavily soiled laundry.
Notes
■
If automatic dosing (i-DOS) is
selected, detergent will be
dispensed automatically for the
prewash and main wash cycles.
■
If manual dosing is selected, you will
need to allocate detergent for the
prewash and main wash cycles. Add
detergent for the prewash to the
drum. Pour washing powder for the
main wash into the manual dosing
compartment.
Soaking
%
Before the main wash cycle starts, the
laundry remains in the water for longer
to remove heavy soiling.
To be used for particularly stubborn
soiling.
Use i-DOS to dispense the detergent or
pour it into the manual dosing
compartment in accordance with the
manufacturer's instructions.
Notes
■
Load laundry of the same colour
together.
■
If your washing machine does not
have this option, you can soak your
laundry as follows:
1.
Select i-DOS or pour the detergent
into the manual dosing compartment
in accordance with the
manufacturer's instructions.
2.
Select the
Cottons
i
30 °C
program and press the
A
button.
3.
Press the
A
button after approx. 10
minutes.The laundry will soak in the
water.
4.
Leave the laundry to soak for as long
as required, then either press the
A
button again to resume the program
or change the program.
Note:
No additional detergent is
required as the water used for
soaking will be reused for washing.
Rinse Stop
$
If final spinning is not selected, the
laundry will remain in the water after the
final rinse.
You can select "Rinse Stop" to prevent
creasing if the laundry will not be taken
out of the washing machine immediately
after the programme has ended.
To resume/end the programme
i-DOS
ý
i-DOS
w
/
þ
i-DOS
M
/
w
Your appliance has an intelligent dosing
system for liquid detergent (
w
) and
fabric softener (
M
).
The optimum quantities of liquid
detergent and fabric softener are
dispensed automatically.
You can press
ý
i-DOS
w
/
þ
i-
DOS
M
/
w
to activate or deactivate
automatic dosing and set the basic
dosages.
