en
Cleaning and servicing
34
Cleaning the drain pump
Requirement:
1.
Since water may remain in the
drain pump, unscrew the pump
cap carefully.
2.
Clean the interior, the thread on
the pump cap and the pump hous-
ing.
3.
Ensure that the impeller in the
drain pump can rotate.
4.
Insert the pump cap.
5.
Screw the pump cap as far as it
will go.
90°
The handle on the pump cap must
be in a vertical position.
6.
Insert and close the service flap.
2
1
Before the next wash
To prevent unused detergent from
flowing straight into the outlet in the
next wash, run the
Άντληση
pro-
gramme after you have emptied the
drain pump.
1.
Turn on the water tap.
2.
Insert the mains plug.
3.
Switch on the appliance.
4.
Pour 1 litre of water into compart-
ment II.
5.
Select a suitable programme for
draining.
→
